Rubbish Gen2 Horn

Ward

.060 Over
Joined
Apr 25, 2022
Messages
174
Location
Droitwich Spa, UK
Ride
R3 GT
I'm very disappointed with the standard Gen2 horn, in particular to stupid place it's located and that it sounds like a Deliveroo rider's 😟,....

https://imgur.com/l9eKhgg

There is just nowhere to mount a proper one (Stebel Nautilus compact) and I've spent a week or two looking ! I eventually bit the bullet and bought a 110bd 12v horn that's a bit bigger than stock, but it just won't fit in the same place.

I've seen a Youtube Video of a guy fitting a Denali horn by bending the supplied bracket and painting it black (and that's a bit bigger) but there are two brake pipes in there which you can't allow the horn to touch - so have mounted it at 90° to the original position, and a bit further out. It's a bit closer to the exhaust than I would like, and had to make a very awkward spiral bracket, but we'll see how it goes ?

Anyone else done something or got any bright ideas ? It might go on the LH side, but it appears you'd need to cut the radiator shroud, and I don't want to do that of course. We'll see if this works - it's certainly a lot louder,......

https://imgur.com/3xqPwqp
 
Well, It's taken quite some time to sort this out. Scheme A fitted OK but not loud enough. Scheme B was to fit a second horn, just below. Being a cheapskate I fitted the stock horn, it was two-tone, a bit louder but still sounded rubbish. Sorry the earlier photo's are no longer available, but IMGUR took exception to some comment and banned all access to the UK !

Scheme C - I ordered another horn similar to the new horn (the replacement horn was no longer available). That also fitted (and worked) Unfortunately the sound was at a different tone, and they didn't so much harmonise as clash ! 😡

Scheme D - I found a small compact "Snail" type electric horn that was allegedly 130db, so went for that. It just fits, and was very difficult to fabricate a mounting bracket.
It comes with its own shield to stop water/spray going in but the main trumpet section is plastic and I was concerned about it being so close to the exhaust. So far, 150 miles later in mixed use, it seems good - and I can hear it even with my sound-cancelling earbuds in ! AND, as you can see from the ebay advert, is was so expensive ! 🤣🤣🤣


 
Last edited:
Back
Top