RENEWING FORK OIL

Hipporider · Feb 3, 2014

Triple trouble said:
It's not a drain plug as such. It's purpose is to hold the mechanism but it serves the purpose.

any drama in attaching the bolt back in place after draining oil ?

Sent from my RM-821_apac_australia_new_zealand_218 using Tapatalk

Triple Trouble · Feb 3, 2014

Not really. An impact driver to snug it up lightly then tighten to spec. The impact gun avoids the internal mech from turnung until it is snug.

Hipporider · Feb 4, 2014

Good to know,thanks Triple

Sent from my Windows Phone Nokia 920 using Tapatalk

zenbiker · Mar 7, 2014

Triple trouble said:
If you remove the wheel you will find an allen screw under each fork leg. Remove it and the oil will drain out. an impact gun will help to re-install them. If you are really fussy you could replace the aluminum washers. HTH
The fork caps are not under spring pressure.

I'm not fully understanding. Are you saying that this is all that is need to drain the forks?

zenbiker · Mar 31, 2014

So...drain the forks from the bottom and simply refill from the top??

RENEWING FORK OIL

Hipporider

Supercharged

Triple Trouble

The Duk of death

Hipporider

Supercharged

zenbiker

Zenbiker

zenbiker

Zenbiker

Similar threads

RENEWING FORK OIL

Hipporider

Supercharged

Triple Trouble

The Duk of death

Hipporider

Supercharged

zenbiker

Zenbiker

zenbiker

Zenbiker

Similar threads

Privacy & Transparency

Privacy & Transparency