Q' for TORs Owners

[Dennsell]

As I mentioned in the K&N thread and someone else did here check the clearance between the overlap on the heat shield, particularly on the headers as whole you were put in the cat delete you may have changed the gap and the resonance in the exhaust which causes vibration could be just bring the two shields together

Problem is it is louder behind the bike and sounds to be coming from the outlets on all three cans.. anyway I will check thru everything you suggested..

 

[Dennsell]

Dennis, you're no spring chicken. Maybe you're just hearing things.....

Ehh! Sorry did you say something Richard
Speak up young fella don't hold back mate

 

[Dennsell]

Here is a thought. Maybe there is a loose piece inside one of the tors. The noise is maybe transferred to the other pipes as well. If you still have the stock pipes, replace the tors one at a time and see if the noise goes with one of the pipes. A lot of $hit I know.

I had thought about doing that if all else fails.. thanks for the suggestion