oil drain plugs

Bike not here at min but, there's 2 at the frount end of the sump plate (frount middle) & 1 near the middle at the back end. You'll get about 5L draining out ( unless it's been over filled :lol:)
 
Did you get an owner's manual with the bike? If so, its in there. Also, check Marcus' (Bishop) tag line. He has a full service manual you can download. Everything you need and more in there.
 
'04s (early '05 model year) have 3 drain plugs in the sump, plus the oil tank. I'm thinkin' Triumph did a running change during the late '05/early '06 model runs, along with gauge faces, gauge mounts, kick stand tang, etc. I remember some of us here were speculating the new pan was a response to output bearing failure...
 
'04s (early '05 model year) have 3 drain plugs in the sump, plus the oil tank. I'm thinkin' Triumph did a running change during the late '05/early '06 model runs, along with gauge faces, gauge mounts, kick stand tang, etc. I remember some of us here were speculating the new pan was a response to output bearing failure...

Interesting. The Service Manual shows two configurations, but both with three plugs. First is for Engine Numbers up to 217501 and the other for those from 217502.
 
'07 Standard drain plug locations.........




Crush Washer Sizes, pick them up at NAPA...





Cat Box Insides, Just in case you need to know...
 
Back
Top