Not sure if I am loading the tune right

[motolink]

when I click on the read map in the ECU area the map always shows 20352 up in the box on the top left of the screen and the same on the line on the bottoms of the screen next to the TPS box.

Then I select the Wayne TRipp tune R3R slip.hex tune from my map file and click load into the ECU. Everyting goes well, I reset the TPS.

Now I notice when I open the R3Rslip.hex file the map number 20352 in the box on the top left of the screen.

Then every time a recheck the map by clicking read map the only the numbers 20352 appear in the top left of the screen and in section on the bottom of the screen.

Have I loaded the R3R slip.hex htune?

 

[warp9.9]

Wayne Tripp had to start with some map for a base map to modify. looks like 20352 is the one. If your worried that it is loading look at the tables in each map you should be able to find something that is not the same. like speed correction, top speed limiter O2 unchecked, note maybe in the notes section. a good one would be Wayne should not use the O2 sensor and the OEM one will have it turned on. you should even find changes in the fuel cells.
If you want you can send it to me and I will take a look at her but I bet you have the right one.
just in case
szczepaniak@grics.net

 

[dougl]

Wayne Tripp had to start with some map for a base map to modify. looks like 20352 is the one. If your worried that it is loading look at the tables in each map you should be able to find something that is not the same. like speed correction, top speed limiter O2 unchecked, note maybe in the notes section. a good one would be Wayne should not use the O2 sensor and the OEM one will have it turned on. you should even find changes in the fuel cells.
If you want you can send it to me and I will take a look at her but I bet you have the right one.
just in case
szczepaniak@grics.net

He should read the Tripp tune from the ECU to confirm it is the Tripp tune.

 

[motolink]

Thank you, I should have thought about compairing the maps.