In their face Denali-Stebel horn Fitment.

FR56

.060 Over
Joined
Aug 21, 2015
Messages
199
Location
Victorville, California
Ride
2014 R3 Roadster "Prudence"
It needed only the already existing wires and mounting points.





Two unequal length brackets from L & R of triple tree joined at horn w/ left side twisted to fit as shown.

Anyone who needs the often required wiring/fuse kit I'll send my unused/unopened one for cost of shipping.
 
Last edited:
I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!
 
Ygransom said:
Did you use a relay with it or just the stock horn wires?
Click to expand...

Stock wiring! Before actual mounting I connected the wires from original horn to the Denali's leads. I pushed button and HONK!

ricochet said:
I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!
Click to expand...

I found here in California the "left side cover" hides a vapor retrieval tank for your gas tank.
 
You did not need the relay for the stebel horn I needed one on my 2005 rocket now thinking of putting one on my 2011 rocket.
If it just plugs in to existing wires please give the kit to someone who will need or use it, many thanks for the offer.
 
I found here in California the "left side cover" hides a vapor retrieval tank for your gas tank.
Click to expand...

I think those are common to all US R3s now. One of my winter projects is to remove it from my R3T.

bob
 
ricochet said:
I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!
Click to expand...
I also installed an air horn with dual trumpets compressor did fit between the headlights behind the original cover and trumpets in place of the air duct above the cylinders head at the rear of the gas tank mounted with a bracket looking forward dry and loud very loud!
 
scot in exile said:
You did not need the relay for the stebel horn I needed one on my 2005 rocket now thinking of putting one on my 2011 rocket.
If it just plugs in to existing wires please give the kit to someone who will need or use it, many thanks for the offer.
Click to expand...

Just send me a PM(anyone needing it) and they're welcome to it for the price of shipping.
 
Bob R said:
I think those are common to all US R3s now. One of my winter projects is to remove it from my R3T.
bob
Click to expand...

Tis a Can O' Corn, Amigo.
I recently did this and with explanation from @DEcosse, it was easy peazy!

 
You must log in or register to reply here.

Similar threads

Holes in 2016 Rocket III Front Rim
Replies
5
Views
195
Jagster
Possibly the last Rocket III Roadster registered in the UK is for sale
Replies
0
Views
182
Ward
Engine Axle Bolt in a bind during crash bar install
Replies
3
Views
747
Ishrub
Lf tor’s in the states
2
Replies
11
Views
881
Earthquake
Any good mechanics in Massachusetts/Rhode Island?
Replies
3
Views
813
MikeR3TFC
Menu
Log in
Register