In their face Denali-Stebel horn Fitment.

[FR56]

It needed only the already existing wires and mounting points.

Two unequal length brackets from L & R of triple tree joined at horn w/ left side twisted to fit as shown.

Anyone who needs the often required wiring/fuse kit I'll send my unused/unopened one for cost of shipping.

 

[scot in exile]

I will take you up on your offer, will send a PM

 

[ricochet]

I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!

 

[Ygransom]

Did you use a relay with it or just the stock horn wires?

 

[FR56]

Did you use a relay with it or just the stock horn wires?

Stock wiring! Before actual mounting I connected the wires from original horn to the Denali's leads. I pushed button and HONK!

I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!

I found here in California the "left side cover" hides a vapor retrieval tank for your gas tank.

 

[scot in exile]

You did not need the relay for the stebel horn I needed one on my 2005 rocket now thinking of putting one on my 2011 rocket.
If it just plugs in to existing wires please give the kit to someone who will need or use it, many thanks for the offer.

 

[Bob R]

I found here in California the "left side cover" hides a vapor retrieval tank for your gas tank.

I think those are common to all US R3s now. One of my winter projects is to remove it from my R3T.

bob

 

[albertaduke]

I did the same install location, but I installed the compressor under the left side cover, ran a house all the way to the front and installed the horn part under the chrome piece where the old horn was. It Fits!

I also installed an air horn with dual trumpets compressor did fit between the headlights behind the original cover and trumpets in place of the air duct above the cylinders head at the rear of the gas tank mounted with a bracket looking forward dry and loud very loud!

 

[FR56]

You did not need the relay for the stebel horn I needed one on my 2005 rocket now thinking of putting one on my 2011 rocket.
If it just plugs in to existing wires please give the kit to someone who will need or use it, many thanks for the offer.

Just send me a PM(anyone needing it) and they're welcome to it for the price of shipping.

 

[1olbull]

I think those are common to all US R3s now. One of my winter projects is to remove it from my R3T.
bob

Tis a Can O' Corn, Amigo.
I recently did this and with explanation from @DEcosse, it was easy peazy!