Ignition key relocation

Mittzy

The Hooligan - Just Doing Stuff
Joined
Aug 29, 2011
Messages
8,533
Location
Brisbane, Australia
Ride
2020 TFC #385, 2014 R3 Roadster 230hp (BRUTUS)
I am looking at relocation my ignition on my roadster
But first I want to try to get the later model 8 pin connector so I can make up looms - not just for me but for others too. I can also make the bracket and maybe put a kit together.
As Rivco no longer produces/sells them.

But I need to find where to get these plugs - male and female.

Thanks
 
These are the plugs - Anyone
Les sent me a catalogue that looks promising.
 

Attachments

  • P1050575.JPG
    43.1 KB · Views: 138
  • P1050576.JPG
    32.5 KB · Views: 124
  • P1050579.JPG
    31.1 KB · Views: 127
  • P1050582.JPG
    50 KB · Views: 121
  • P1050581.JPG
    30.4 KB · Views: 116
Relocate the key to your belt - do to a digital keyless system. It will cost about $20-30.
 
Well I made a cable up - Works a treat.
Removing the Ign Barrel was a complete PITA, I did as Albertaduke had mentioned - Removing the top section of the triple tree.
This gave me access to install an accessory socket in place of the Ign Barrel.
Pics Below
 
The wires are crimped AND soldered.... The rubber water grommets don't go all the way in because it is a fairly crowded plug
 
You must log in or register to reply here.

Similar threads

Keyless Ignition Complete
Replies
3
Views
514
Anthony5900
Keyless ignition?
Replies
4
Views
2K
TRath
Touring turn signal relocation
Replies
2
Views
655
Kevin frazier
Keyless Ignition and Key switch elimination
Replies
3
Views
1K
idk
3d printed 12v ignition socket
Replies
3
Views
1K
TURBO200R4
Menu
Log in
Register