Idle adjustment

[dragline708]

Photo is from Japanese forum , its been
translated to English , but no other info
other then what you see .
http://209.85.135.104/translate_c?h...umph+rocket+III+forum&start=20&hl=en&lr=&sa=N

Maybe someome with tuneboy can elaborate
since the program can change settings and you
can see what your doing .


wayne

 

[hombre]

Wayne

That's the primary throttle position sensor... where voltage must be set correctly before attempting to reset idle stepper voltage with TuneBoy. Of course, throttle cable adjustments should be checked before beginning any of this! Following these procedures, I have never had to f@@k with the dreaded "yellow screw".

 

[Sidecar Flip]

Wayne

That's the primary throttle position sensor... where voltage must be set correctly before attempting to reset idle stepper voltage with TuneBoy. Of course, throttle cable adjustments should be checked before beginning any of this! Following these procedures, I have never had to f@@k with the dreaded "yellow screw".

If you search the forums, you'll find that Tomo has a sticky somewhere about setting the TPS voltage and the base idle value.

 

[Pig9r]

Here is Tom's, there is a link in there to the first fix too.

Link Removed

I have never had to f@@k with the dreaded "yellow screw".

I think those are set from the manufacturer, before even being placed on the bike, so if the factory doesn't mess with it, you won't find a dealer to fix it. I would think you could really do some damage.

 

[dragline708]

sorry mistake, SO i have to write 15 characters