Willtill
Nitrous
Well.. finally got the Hyperlights installed; after much head scratching as where to mount them. I think this is the best spot; they greatly assist the OEM brake light and I've always felt that the Rocket was VERY lacking in rear illumination.
The Hyperlights are the Universal 16 Led's per unit; and I have them set to constantly flash as the brake is applied. You can cut one of the control module wire (the green wire) to let them flash 5 times and then stay on bright like a brake light; but I like the constant flashing brake light better.
These are VERY easy to wire up; they use Posi-Connectors to tap into the bike's brake wire; as well as a constant ignition wire and a ground.
Also, you can see the new Bridgestone Exedra max tire, going out in about an hour to scrub it and get the mold release agent off of it.
The Hyperlights are the Universal 16 Led's per unit; and I have them set to constantly flash as the brake is applied. You can cut one of the control module wire (the green wire) to let them flash 5 times and then stay on bright like a brake light; but I like the constant flashing brake light better.
These are VERY easy to wire up; they use Posi-Connectors to tap into the bike's brake wire; as well as a constant ignition wire and a ground.
Also, you can see the new Bridgestone Exedra max tire, going out in about an hour to scrub it and get the mold release agent off of it.