How do I find ISCV nut?

vocaldog

VocalDog
Joined
Jan 11, 2008
Messages
153
Location
Southampton, NY
Ride
2005 Rocket Standard
I've adjusted the TPS to 0.6v, and now I want to set the ISCV correctly. Can anyone help me find darn adjustment nut?
 
red arrow is the ISCV, the yellow arrow is the nut, you can see the dab of yellow paint they put on it in the factory. 7mm iirc



and what it looks like from underneath
 
Did you check the gap before you set the tps to .6 the gap between the roller and cam should be .5mm after you retract the stepper motor. once it is you then set the tps to .6 volts. +-.2 volts then click ISCV and the motor should retract .12 volts +- .5 volts for total of .72 volts without the tolerances .
 
I did not. Ive got to go buy a happier and then that's on the menu for tomorrow. I just ran out of light....
 
That was a great pic,
R-III-R Turbo. Does anybody have a good pic of where I need to place the ISCV Gapper?
 
warp9.9 said:
stepper motor adjustment nut is 7mm a short combo wrench works great



the gap is set between the throttle roller



and the idle speed cam



hope this helps
Click to expand...

That's just what I was looking for. Thanks so much. Looks like it's going to be hard to get the gapper up in there! Wish me luck!
 
So it seems that my stepper control arm is rusted as hell and won't return to the fully open position without some 'motivation'. I'm gonna lube it up tonight. Does anyone know where I can order a new one?
 
You must log in or register to reply here.

Similar threads

How to obtain Tuneecu license file? New tablet on android 13, PayPal is not working….
Replies
4
Views
165
boe
How to flash map using TuneEcu?
Replies
0
Views
387
Grizli784
Not how I remember
Replies
8
Views
708
Dr.D
Consensus about to which gears i1 i2 i3 do correspond?
Replies
0
Views
349
Lost Soul
Unable to register tune ECU Via Paypal and Wise. Is TuneECU dead and gone? Alternatives I could use?
Replies
6
Views
169
atomsplitter
Menu
Log in
Register