Help W Eastern Beaver Mod

desertw0lf said:

So I ordered my EB switched headlight mod. However, I got the version with the fuse panel connect... The Rocket 3 does not have an auxilary fuse panel, does it? Is there a spot in the main fuse panel I can connect this thing? I meant to order the connected-to-battery version, but will have to work w what I have without spending any more money if possible.

Click to expand...

Dennsell said:

I would run a heavy cable from batt pos + through an 20 amp inline fuse holder and connect inline fuse to the fuse panel cable of the kit.

reverse order..fuse panel cable to inline 20 amp fuse holder conect to the length of heavy cable going to the battery pos +

Hope this helps

Click to expand...

desertw0lf said:

Can i not connect directly to the fuse panel?

Click to expand...

Dennsell said:

I dont think so
the whole Idea is to feed the h/lamps directly from battery pos+ so that you bypass the Ign switch..

If you use the fuse panel I am sure you would be back on the Ign switch..normally the fuse panel has Ign switch connection.

Click to expand...

desertw0lf said:

Can i not connect directly to the fuse panel?

Click to expand...

Dennsell said:

I havnt seen that kit let me check unless you know the kit has a battery cable and its just the relay low voltage side that requires fuse panel connection.

What EB kit part no do you have?

Click to expand...

desertw0lf said:

Looks like I'll be waiting a good long while to get it installed, then. Don't have any more money to spend into this for a little while have to pay off the card from other purchases, first. Also not sure I have the electrical know-how to not screw it up.

Click to expand...

desertw0lf said:

Link Removed

Second one on this page.

Click to expand...