motolink
Nitrous
- Joined
- Sep 11, 2010
- Messages
- 1,431
- Location
- Brisbane South, Australia
- Ride
- 2011 Roadster and 2001 Bonneville
I am stuck here, trying to fit the front dresser bars, was knocking the engine mount bolt out and the engine seems to have moved back a fraction, now the engine mount will not move in or out, the screw driver I was using to push the bolt through is stuck as well, and both are stuck very tight.
No matter what I do with jack hold the motor it makes no difference.
Anyone struck this and overcome it.
I thought I might have the jack in the wrong position.
No matter what I do with jack hold the motor it makes no difference.
Anyone struck this and overcome it.
I thought I might have the jack in the wrong position.