Bishop Turbocharged Joined Sep 24, 2007 Messages 824 Ride 2005 Rocket III Apr 29, 2009 #1 Idle stepper. Also, when you've adjusted your TPS, did you torque the screw to 3.5nm? See this thread regarding TPS: Assuming you have a TuneBoy? What other mods?
Idle stepper. Also, when you've adjusted your TPS, did you torque the screw to 3.5nm? See this thread regarding TPS: Assuming you have a TuneBoy? What other mods?
Bishop Turbocharged Joined Sep 24, 2007 Messages 824 Ride 2005 Rocket III Apr 29, 2009 #2 So you're just winging it with a multimeter on the TPS or does the PC3 give you that data? You need to do the whole procedure as described in the manual. TPS is only one part of this. The idle stepper is the other.
So you're just winging it with a multimeter on the TPS or does the PC3 give you that data? You need to do the whole procedure as described in the manual. TPS is only one part of this. The idle stepper is the other.
Bishop Turbocharged Joined Sep 24, 2007 Messages 824 Ride 2005 Rocket III Apr 29, 2009 #3 Best thing to do may be removing the idle stepper and see what happens.
owl Turbocharged Joined Jan 6, 2006 Messages 824 Location Canterbury, England Apr 29, 2009 #4 Disconnected my idle stepper motor from the throttle bodies, but kept it wired in - just cable tied it up under the tank - cured all of my idling problems immediately. There's a 'How To' on it I followed.
Disconnected my idle stepper motor from the throttle bodies, but kept it wired in - just cable tied it up under the tank - cured all of my idling problems immediately. There's a 'How To' on it I followed.