OK, all the information about the Beast is in my signature: so out for a ride this morning with the local Triumph club, on the way to meet up I noticed that the gear position on the taco was reading 5 in 5th but when changing down stayed in 5 on the readout for a few seconds before reading 4th, or if I had already changed down to 3rd it would switch straight to 3, so figured I would keep an eye on it.
Have a cuppa and chat then head off on the ride, 1/2 hour in notice its reading 6 on the readout when in top, and down to 5 when in 4th. bit further on readout is all over the show flicking between 1 and 6 mainly, still a bit further and readout on gauges is 1 regardless of gear I am in, and engine warning light comes on (no lose of performance etc), had to do about 15-20km to next stop. Once there checked all the fuses (apart from 30amp) were good and pushed home, engine light still on so left the ride and came home (another 12km, gear readout still everywhere). So get home read the manual which tells me FA, then decide to check the 30amp fuse (had given it a visual and could see it was good), pulled, checked and replaced it........... engine warning light now off, gear position readout still appears off when running through the gears in the shed.
So I am thinking the GPS is knackered or at least on the way out, so bike into the stealer for a warranty claim in the morning...... or am I barking up the wrong tree?