Front tire removal.

[rick danger]

I'll be doing my front tire tomorrow. Just want to mention in case I forget, if you take off your calipers, when putting them back on, bring the bolts close to tight, but don't tighten them fully without the front brake lever pulled. A zip tie will do it. It makes sure the pads are fully flat to the rotor

 

[Steff]

The brake calipers absolutely must be removed otherwise you will not be able to remove the wheel. For the axle it is a 19 mm male BTR and it must be tightened to 65 Nm. I just did it...

What calipers?

 

[Protonhound]

I'll be doing my front tire tomorrow. Just want to mention in case I forget, if you take off your calipers, when putting them back on, bring the bolts close to tight, but don't tighten them fully without the front brake lever pulled. A zip tie will do it. It makes sure the pads are fully flat to the rotor

Indeed, I got front brake pads to do as well.