Front suspension swap

warp9.9 · Nov 10, 2014

Does anyone have any information or links to the Wilbers set up/conversion for the Rocket Standard/Classic models?

R3Tex · Nov 10, 2014

Tried calling them but they are closed until tomorrow I've been putting this off for a while, but it's time to get back on this project.

Trirocket3 · Nov 10, 2014

Claviger said:
I have been thinking over the front end of the R3R. I can't stand the front suspension, after swapping rear shocks the front feels both too harsh and too soft creating an overall loose feel.

Just wondering if anyone has gone down this road already.

Thinking of picking up a set of forks from an 07 Speed Triple. The triple tree mounting points are the same dianeter, not sure on length though.

Then I would grab a set of Brembo S3 calipers to fit the new radial mounts on the forks.

The three big variavariables I am not sure of are fork length, axle diameter, and brake rotor offset.

Anyone know if it us viable without a bunch of custom fabrication to make it work? If it is a straight bolt on its a pretty significant upgrade with minimal cost.

I am fitting street triple forks & radial brakes to my Bonnie, I would not fit them to my R3 as the triple is around half the weight, I would use something far more substantial & get yokes (triple trees)

Front suspension swap

warp9.9

Pocałuj mnie w dupę

R3Tex

Living Legend

Trirocket3

Turbocharged

Similar threads

Front suspension swap

warp9.9

Pocałuj mnie w dupę

R3Tex

Living Legend

Trirocket3

Turbocharged

Similar threads

Privacy & Transparency

Privacy & Transparency