Eastern Beaver w/light c/o switch?

Mittzy said:

Do you have the correct kit?

Click to expand...

tdragger said:

This sounds like the kit that you have. The leads at the top come bare as shown or you have the option to get a fuse holder. If you have a bare leads, the assumption is that you have a secondary fuse panel such as a PC-8. It is not designed to connect to the Rocket's main fuse panel. The option with the fuse holder is the one that connects directly to the battery. If you have the bare leads and no secondary fuse panel, then you should purchase a fuse holder at Autozone or Amazon so that you can connect to the battery.



The secondary fuse panel that I'm referring to looks like this:



You might need something like this to connect to the battery.

Click to expand...

geno said:

I have the kit that does not have the in line fuse, my pos/neg lines go to a fuse box also I have the on/off switch, can I tie into a 12 volt line from the fuse box.

Click to expand...

Mittzy said:

I still would be putting an in line fuse on it and connecting direactly to the battery

Click to expand...