Drive shaft spline lube

[Mike Rocket]

m

The loctite works very well.

I think I will go for the Loctite LB 8012 as the Honda type is only a small tube and much more expensive size wise than the Loctite. Both of which I have to order from the USA. Don't know why we can't get this stuff in the UK.

 

[alpental]

Another +1 on the Loctite moly paste. I use it twice a year every time I change my rear tire. Great stuff, and that little bottle lasts ages.

 

[sonny]

It is only 11 degrees outside but when out to shed to look. 8012 is the stuff I have been using. Works great.

 

[Grumpy Ole Codger]

I think I will go for the Loctite LB 8012 as the Honda type is only a small tube and much more expensive size wise than the Loctite. Both of which I have to order from the USA. Don't know why we can't get this stuff in the UK.

Mike, been having a nose around at the various options which should meet the requirements. There are several types of Molbodenum based compounds available her in the UK.
This is another one LM48
Liqui Moly LM 48 Installation paste and lubricant 50g 3010 | eBay
Hope this helps.

 

[Mike Rocket]

Mike, been having a nose around at the various options which should meet the requirements. There are several types of Molbodenum based compounds available her in the UK.
This is another one LM48
Liqui Moly LM 48 Installation paste and lubricant 50g 3010 | eBay
Hope this helps.

Thanks. I cannot make out if the Liqui moly LM48 is the high moly content paste or the same stuff you get in the tins you can buy in the motor stores here in UK which is only 3% Moly MoS2

 

[Mike Rocket]

It is only 11 degrees outside but when out to shed to look. 8012 is the stuff I have been using. Works great.

Thankyou.

 

[sonny]

Have 37,000 miles on the bike with no wear or tear on splines.

 

[markc]

Thankyou.

Honda moly paste is 60% moly. Make sure what ever u buy is at least 60 % moly.

 

[Mike Rocket]

Honda moly paste is 60% moly. Make sure what ever u buy is at least 60 % moly.

Thanks

 

[Mike Rocket]

Have 37,000 miles on the bike with no wear or tear on splines.

looks like the one to go for, thanks