Denali D7 Fitting

The hella din socket under the meters is supplied with + after ignition, so it's good. If you don't use this outlet, the wires that feed it are OK.
A little work, but easy!
 
F6C said:
The hella din socket under the meters is supplied with + after ignition, so it's good. If you don't use this outlet, the wires that feed it are OK.
A little work, but easy!
Click to expand...
Thanks, I did look at that when fitting my sat nav, I was Trying to avoid removing all that loom that is tucked away so nicely
 
Ygransom said:
Conside adding a fuse block to bike. I have a PC8 that has 5 switched and 3 hot taps. The is an electronic 1 that allows you to assign taps
Click to expand...
I did have one of those on a Ktm I had. Good thing about the Ktm was it had spare connectors dotted round the bike so you could easily add electrical stuff easily
 
Not my taste. But I believe that the smaller Darla would look much better and bringing same security - ref. my post #27 of today at : Fork Mounted LEDs - Cool or Not-Cool?

Darla

At Clearwater Lights, your safety is our primary concern. Clearwater Lights are the only fully-adjustable high-powered LED auxiliary motorcycle and off-road lights available, allowing you to maximize your ability to see and be seen in constantly changing ambient light conditions.
www.clearwaterlights.com
 
Last edited:
You must log in or register to reply here.

Similar threads

Denali DRL’s Instαlled
Replies
2
Views
459
pica
Fitting round mirrors
Replies
1
Views
577
RUN666
Pannier fitting kit
Replies
2
Views
916
Moogus
Searching for wire to tap Denali DialDim
Replies
1
Views
721
AlexThibo
Fitting a Tank Rack to a 2.5l Rocket 3
2 3 4
Replies
30
Views
3K
papanorm
Menu
Log in
Register