Cruise Control

[Ygransom]

Looked everywhere and can't find a vacuum storage tank. Like I said, works great, and sure is a cheaper alternative to the electronic ones.

Build your own using thickwall PVC. Do a search of this and he .com site, there were pictures of homemade vacume tanks.

 

[Rayvin]

Notice the picture below had the vacuum storage tank along with the control unit noticed it was extremely cheaper than the electronic does it work – well that would be extremely nice on the interstate especially pulling my bunkhouse camper it would sure take the strain off the wrist

No Jesse, I meant I looked everywhere on my R3 and didn't find a storage tank. The rest of the unit works perfectly without one...

 

[STRIPES]

Wholey crap! That tent unfolds from that little trailer! And I thought my camper was cool!

 

[slidderhd]

popups are cool.

 

[UNCLE JESSE]

Wholey crap! Hhat tent unfolds from that little trailer! And I thought my camper was cool!

I love the king-size bed gives me room to run around in my birthday suit

 

[Mittzy]

Hi Rayvin,
Nice job on the control switch clamp!!!
Can you tell me how you got the speed sensor to work? did you use magnet pickup or pulse from bike?
If you used pulse from bike what settings did you use?
Or if you used magnets post photo! Please?
do you have photo of throttle linkage? I would like to see how you did this.
I have an electronic kit to install, i got mostly done but didnot like the thottle pick up, and pulse settings etc.

 

[Rayvin]

Hey Mittzy- Like I mentioned, the ccontrol was on there when I bought the bike, so no credit to me for the switch clamp. When I have some time I'll dig into the setup some more, find out what type of speed pickup I'm running and post some pics. All I know is it's as reliable and rock steady as the ones in my car and truck.

 

[Dennsell]

I want one too... I will follow the info.. Cheers

 

[Mittzy]

Hey Mittzy- Like I mentioned, the ccontrol was on there when I bought the bike, so no credit to me for the switch clamp. When I have some time I'll dig into the setup some more, find out what type of speed pickup I'm running and post some pics. All I know is it's as reliable and rock steady as the ones in my car and truck.

Hey Rayviv,
On the back of the vacuum unit there will be a removable panel with 2 screws, behind this will be a switch bank (As per photo), can you tell us the swith posiitons?
Picture stolen from : Audiovox Cruise Control Install
Thanks
http://www.valkyrieriders.com/shoptalk/cruise_files/servo_rear_cover_jumper_before.jpg

 

[slidderhd]

bump.........