Cruise control not working

Rodneyjd6

.020 Over
Joined
Mar 13, 2016
Messages
50
Location
Gold Coast
Ride
Rocket 3 roadster
Hi i have a cruise control fitted on the rocket was working great i added some fuel to the map on decell through tuneecu would that stop it from working
 

Attachments

  • 20160706_155119.jpg
    201.7 KB · Views: 15
I wouldn't have thought so you could Use the old map an try it again. Or Call the manufacturer they are very helpful.
 
I think you my have dislodged sometihing around the OBD2 connector. Check fuses
 
The cruise control will not know any tune changes. There is only four or five things it could be
  1. Brake light engaged - foot on brake for example
  2. Clutch switch engaged
  3. Poor speed pulse
  4. Broken cable to the throttle body
  5. Faulty unit
If you have no joy here call or email mccruise they will be more than happy to assist
 
Thanks
 
Mine quit working one time during a group ride, and when we stopped (most of the riders had never seen a Rocket) there was a small crowd around the bike, and the classic rhetorical question, "Is that wire supposed to be hanging loose like that ?"

The brake sense wire had come loose from the brake lever switch on the handlebar.

As a safety aspect of the McCruise design, the system will not "arm" until it senses the brake light. If that is lacking, the McCruise unit will not set.
 
You must log in or register to reply here.

Similar threads

Rocket 3 GT Cruise Control
2
Replies
11
Views
2K
1olbull
Fuel Guage stopped working
Replies
2
Views
129
TriumphR3Newb
P0505 idol speed control system malfunction
Replies
0
Views
416
jcomp
  • Question
Forward to mid controls.
Replies
5
Views
148
stingray
Forward foot control effect on choice of bike.
Replies
5
Views
700
Jagster
Menu
Log in
Register