A short, fat guy, a couple of Hagons and a Rocket Touring...

The dealer that ordered your shocks should have had them made for your wieght and to go on the rocket. I can't think how that would not happen.
 
All Rockets use the same shock. If you ordered form Hagon they should ahve came with the correct weight spring and prload set close to where it needed to be. Either you got the wrong spring rate or the install removed all teh preload.
 
Hard to see the diff in weight.
Even if 50 pounds, its not all over the shock and should be "built" in to the shock model/design.
I have heard all good with Hagon.


 
Well, I'm around 240lbs, & have the Hagon nitros at 340mm ( extra long) If anything, the springs are too hard!! certainly no chance of bottoming.
 
You must log in or register to reply here.

Similar threads

Need information, A measuring tape, some time, and the 2004-2009 Rocket III. (Added photos of cats!)
3 4 5
Replies
44
Views
2K
oteczdmitriy
Pre loved Dave Platt Slash Short bolts and stuff.
Replies
0
Views
339
Zanx
Researching a Rocket 3 purchase
Replies
8
Views
463
Torque for England
It's with a heavy heart......
Replies
7
Views
453
Rocket Scientist
Fueling/Throttle issues on a Classic
Replies
1
Views
74
rainman
Menu
Log in
Register