Anyone Else Lost a Heat Shield Yet?

Journeyman · Oct 11, 2025

Got back from a ride and this is what I see. I remember something hitting my boot and wondering, at the time, what it was.

About $60 + tax + shipping for one shield, two grommets, and two bolts.

Sparky59 · Oct 11, 2025

Go Carbon?

bhertz82 · Oct 11, 2025

No, but I know what I’m torquing the next time I’m in the garage.

Journeyman · Oct 12, 2025

So the grommets (#5) go in the hole in the exhaust and have the threads for the bolts. My top one was loose, so I spun it around and kinda popped it into the hole and then torqued everything up- before the last ride. I think once the exhaust gets hot the hole on the pipe expanded and no longer held the grommet in place.
I don't want to mess with the other two, which are fine, to better understand, so I'll have a look when the new parts come. I need a better plan to keep the grommets from detaching. Would a bit of JB Weld work- yah think?

rick danger · Oct 12, 2025

I guess there isn't room for a rivnut? And then some of those high temp fiber washers

imcool · Oct 12, 2025

bhertz82 said:
No, but I know what I’m torquing the next time I’m in the garage.

the issue is cheap nuts and weld on it, it tends to slip the thread/rip the thread. of nut, though torquing will help but dont rely on it as permanent solution.

Kiwicol · Oct 12, 2025

I've had my heat shields off a couple of times, (polishing the headers) & I never knew the threaded bits (#5) came out, they've always just stayed put. I'll have to watch I don't loose one next time I take them off.

Journeyman · Oct 13, 2025

I rode back the next day and found it- middle of the road and had been run over. I don't see how the grommets are held in place by the holes in the exhaust (well, they were not)....

It would make more sense if the grommets were turned around and came in from the back of those holes. I have a feeling that is the way they are supposed to go and some numb nuts reversed them in production. I'll see if I can stick a mirror behind the others to see how they were installed. Curious if anyone else knows the setup on their bike.

rick danger · Oct 13, 2025

Here's mine. They all feel pretty solid. Not like they're gonna fly off. '24 GT

Nashvegas · Oct 13, 2025

Journeyman said:
I rode back the next day and found it- middle of the road and had been run over. I don't see how the grommets are held in place by the holes in the exhaust (well, they were not)....

It would make more sense if the grommets were turned around and came in from the back of those holes. I have a feeling that is the way they are supposed to go and some numb nuts reversed them in production. I'll see if I can stick a mirror behind the others to see how they were installed. Curious if anyone else knows the setup on their bike.

A few of mine got loose and I had a buddy spot weld all of them. No problems after that.

It would make way more sense to have the flange underneath.

Anyone Else Lost a Heat Shield Yet?

Journeyman

"And this one is just right" ~ Goldilocks

Sparky59

The Guy With The Most Toys Wins!

bhertz82

.020 Over

Journeyman

"And this one is just right" ~ Goldilocks

rick danger

Supercharged

imcool

Turbocharged

Kiwicol

Career Beer Taster

Journeyman

"And this one is just right" ~ Goldilocks

Attachments

rick danger

Supercharged

Nashvegas

That’s a Rocket, son.

Similar threads

Forums

Features

Forum Usage