Workshop Stand

Thanks Hombre - I didn't appreciate that there was an alternative...

I've found a supplier in the UK that can supply Raask for much less than the Ebay product.

Cheers

Drofsereb
 
Works fine, but be aware that it doesn't lift the back wheel far enough off the ground to remove it.
 
Thanks - my real interest is for cleaning and winter storage so that's not a huge problem...
 
I've got one of these and is great as a garage stand and for general cleaning. Easy for one man use. Just make sure your side stand is down when you bring the bike off the garage stand No damage done but frightened the crap out of myself.

Dave
 
Raask stand

I have the raask stand. It doesn't lift either wheel off the ground period.

All I can figure out is the upgraded shocks have more lift than the stock ones.

I have to take the stand and set it on a piece of plywood to get the wheel up enough so that it will turn.

It's a good design concept, just needs a little more height. I havent come up with a good way to modify the thing yet.

This pic demonstrates the problem http://www.dunringil.com/my slide shows/rocket mods/ef_1.JPG

In UK the stand can be bought at http://www.jacklilley.com
 
You must log in or register to reply here.

Similar threads

Locking Kick Stand
2
Replies
18
Views
1K
railcutter
  • Question
Japan Standards for Emissions & Braking
Replies
0
Views
121
Joe Brogren
Side Stand Eliminator Switch
Replies
3
Views
819
TURBO200R4
installing standard Pegs on Rocket 3GT 2024
Replies
1
Views
384
2023R3GT
Workshop Manuals Bound books
Replies
0
Views
805
Micksan
Menu
Log in
Register