Somewhat new to the R3T Lifestyle..

[Sparky59]

Ive spent many years hiding behind an ancient windjammer 3 faring, so yeah, pretty spoiled..

 

[Sparky59]

Found the Clearview website, will use the measurement tools from the website to measure up a taller and wider windscreen, the prices are within reason, i'll be ORDERING a windscreen. Thanks for the suggestion!

 

[BigNorm]

Welcome from Minden Nevada.

 

[foxviewnet]

Found the Clearview website, will use the measurement tools from the website to measure up a taller and wider windscreen, the prices are within reason, i'll be ORDERING a windscreen. Thanks for the suggestion!

Welcome Sparky! I ordered a Clearview a few months ago and really love it. I opted for the recurve at the top and it pushes the air up and over my helmet along with most of the bug population. I can run 75mph with my visor open with little or no buffeting. The only complaint is that the recurve gives me a little visual distortion at the top. I have gotten accustomed to it as I am only 5'10" and look thru the windscreen at the very top.

 

[Eric R.]

Sparky, My Clearview is two inches wider and 18" high with recurve and vent. No buffeting to speak of.

 

[Nat67]

Navigator, Is "clearview" the brand? The 4" wider is intriguing? as i am tkinking of ordering a lexan like material from McMaster carr and scratch building a windscreen approx 4" larger, up and to the sides....if you get a chance could i bother you for 2 measurements? Height from lip above headlight to top of windscreen, and width at widest point...Thanks, Norm

You may want to give a shout to @BigNorm
He has made some pretty good windscreen mods ! Welcome to the fun from Dartmoor England .

 

[Navigator]

Below is the information on the Tourings. One can select the 4 inch wider option, which I will do. I got it wrong on the one I ordered for my 07 Classic, opting for the 25 inch. I'm 5'11" and it was about an inch too tall, splitting my vision unless I sat very upright. I got used to it though. I'll be doing some measurements for this one to ensure it is below my vision plane.

https://www.clearviewshields.com/motorcycle-windshield/triumph/rocket-iii-touring-shields/

It really is different with the Touring because the tall Triumph screen I presently have measures 24 inches from the center bottom, which is actually the chrome mounting plate. I want to get it right this time.

 

[BigNorm]

I'm not sure if you want to travel my path. I make much of my own stuff because I lack the funds to buy store bought stuff. I used 1/4" Plexiglas and built my own shield. I was a little discouraged when I figured out my huge riot shield wouldn't fit in the oven, so I went and cranked up the gas bbq. I'm surprised it worked.

 

[Navigator]

I'm not sure if you want to travel my path. I make much of my own stuff because I lack the funds to buy store bought stuff. I used 1/4" Plexiglas and built my own shield. I was a little discouraged when I figured out my huge riot shield wouldn't fit in the oven, so I went and cranked up the gas bbq. I'm surprised it worked.

My Canadian friend used to do that quite successfully on his Harley (s). I tried to make a plexiglass window for one of our bird feeders and bunged it up so stay away.

 

[FR56]

Barndoor windshields tall and short create buffeting, and speed robbing, gas-guzzling resistance, and drag.

I cured both with the 'Sport-shield'