Scissor Jack For Rocket?

[dobro]

In looking at the common motorcycle scissor jacks with sliding saddle adapters it seemed to me that they could be used to lift Rockets if the 2 stems that fit into the jacks' saddle adapters were modified with a slot to accept the Rockets' two existing hole brackets. I don't have any engineering or machinist skills so I know this might be ridiculous but I'm suggesting it because we need a better cheap way to get our Rockets high up in the air. If that would work is it something a forum member could make for a particular model scissor jack and sell to us?

 

[albertaduke]

In looking at the common motorcycle scissor jacks with sliding saddle adapters it seemed to me that they could be used to lift Rockets if the 2 stems that fit into the jacks' saddle adapters were modified with a slot to accept the Rockets' two existing hole brackets. I don't have any engineering or machinist skills so I know this might be ridiculous but I'm suggesting it because we need a better cheap way to get our Rockets high up in the air. If that would work is it something a forum member could make for a particular model scissor jack and sell to us?

get a lift table shop around look for the commercial grade don't skimp on $ this bike need a H-D table then get one scissor jack for replacing wheel that slide under the belly. do as I did I went to several bike shops in town and asked when they were replacing their older table sure enough the big dealership in town (blackfoot motor)replaced all nine tables so for $600 I got a commercial grade solid table . had to buy the air compressor though but what a great way to work on the bike now everything is at eye level
R3 are formidable machines they require solid sturdy lifts ..don't skimp

 

[tdragger]

I use a Black Widow jack on the lift table. Works great.

http://www.discountramps.com/motorcycle-lift-jack/p/MC-JACK/

 

[dobro]

I use a Black Widow jack on the lift table. Works great.

http://www.discountramps.com/motorcycle-lift-jack/p/MC-JACK/

Against what do you rest the jack's platform?

 

[CanberraR3]

Against what do you rest the jack's platform?

The underside of the bike, Dipstick.

 

[breeze]

The underside of the bike, Dipstick.

AND THE FLOOR

 

[tdragger]

The adapters fit to the engine tags near the rear tire.