Kevin frazier

Widowmaker!
Joined
Dec 22, 2018
Messages
8,178
Location
Nashville
Ride
2008 Triumph rocket 3 touring
I was lucky enough to become Blackies owner several years ago and went through wheels and brakes and rode that spring and sumner. Rode it to the West Virginia raa and had a few issues arise, detent spring broke, no problem just held pressure until throttle pressure takes over, but cables breaking were an issue, mc cruise broke and return cable broke on throttle. Well ole sparky59 used some ingenuity 😁 and i rode it home, broke detent spring,, clutch slipping in 4th under hard load, yeah i trusted sparky59 so much i enjoyed the 575mi ride home, strait thru. Well after getting home Blackie had to sit a minute. Now its time to get her back to 💯. Starting up front, headstock bearings, forks worked, forks leaked on brakes, brakes 😂, calipers and pads i tell u what. All cables, all brake lines, new clutch pack, new oil, new coolant. That will start this deal. Fuel sytem will be next, tank filter, fuel lines, i have clean injectors ready. Hopefully this dont take too long.
 

Attachments

  • IMG_7049.jpeg
    IMG_7049.jpeg
    134.6 KB · Views: 8
  • IMG_7078.jpeg
    IMG_7078.jpeg
    203.6 KB · Views: 8
  • IMG_7224.jpeg
    IMG_7224.jpeg
    261.6 KB · Views: 8
  • IMG_7228.jpeg
    IMG_7228.jpeg
    221.8 KB · Views: 8
  • IMG_7230.jpeg
    IMG_7230.jpeg
    124.6 KB · Views: 8
  • IMG_7231.jpeg
    IMG_7231.jpeg
    199.9 KB · Views: 8
  • IMG_7232.jpeg
    IMG_7232.jpeg
    221.6 KB · Views: 8
  • IMG_7229.jpeg
    IMG_7229.jpeg
    136.6 KB · Views: 8
  • image.jpg
    image.jpg
    157.4 KB · Views: 8
Back
Top