Off For Some Surgery.....

[Mittzy]

Mittzy, is pro cycles of moss st? Would they be the place to go to get a dyno tune.

Jim, They are just off Moss Street - 2/12 Herbert Street, Slacks Creek, QLD 4127
http://www.procycledyno.com.au/

 

[cardinal93]

If I sign up for Obamacare can my bike have the same surgery for free?!!
I'll vote DUMocrat or Republi**** for that
(Just joking btw, before one of you shoots me in my sleep!)

 

[TriumPhil]

Getting up to or over 200 rwhp, turns the Rocket into a very different machine, Tony. Have fun and take your time getting reacquainted when you get her back!

 

[Mittzy]

T

Getting up to or over 200 rwhp, turns the Rocket into a very different machine, Tony. Have fun and take your time getting reacquainted when you get her back!

Thats the plan mate

 

[Neville Lush]

Definately NOT drop in street cams. 425 lift inlet 400 exh. I guess Fred will be calling re cam timings sometime soon . Good luck. Should be a nice package. BTW Ponters had oversize valves and a few other bits so hard to compare. Motor should pull from 1800 to 7500. You may notice a slight increase in accelaration )

 

[Mittzy]

Definately NOT drop in street cams. 425 lift inlet 400 exh. I guess Fred will be calling re cam timings sometime soon . Good luck. Should be a nice package. BTW Ponters had oversize valves and a few other bits so hard to compare. Motor should pull from 1800 to 7500. You may notice a slight increase in accelaration )

Like x 100
Pistons are in - bottom end complete. Just waiting on the head

 

[Mittzy]

Also opened up the header machined ends for better flow. Hard to see in the pic

 

[pete.triumph]

the power and the glory

Definately NOT drop in street cams. 425 lift inlet 400 exh. I guess Fred will be calling re cam timings sometime soon . Good luck. Should be a nice package. BTW Ponters had oversize valves and a few other bits so hard to compare. Motor should pull from 1800 to 7500. You may notice a slight increase in accelaration )

would fitting CF wheels rear being 7 kg lighter than stock make a difference on the power reading on the dyno , when you done mine it had sock wheels now I have fitted CF wheels

 

[BigKel]

Like x 100
Pistons are in - bottom end complete. Just waiting on the head

What comp ratio are going to have mate?
Looking good

 

[Mittzy]

What comp ratio are going to have mate?
Looking good

about 10:1 and Nev mentioned something extra about an increase with the head work. I am ***n hopeless at remembering those details.