No spark.

Buckster

Standard Bore
Joined
Sep 21, 2009
Messages
9
Location
Atlanta
As it is all of them it is something before the coils, I suspect the engine management computer has registered a fault and shut down the ignition, or it is something simple like the plug between the coils and ignition regulator if it exists. Have you tried just disconnecting the battery for ten minutes, then reconnecting and trying again?
 
stick some other plugs in her to see if they spark. This sounds pretty weird. Is all the wireing back together on top?
 
Is the crank position sensor good and correctly fitted? If not the ECU will not fire the plugs.