No Power at Hella Plug

TURBO200R4

stand up straight and grab the world by the a$$
Joined
Jan 24, 2013
Messages
5,167
Location
TUCSON AZ
Ride
07 rocket III classic
best way to check voltage\
now that u have the info on meter place red probe to battery positive and black probe to battery negative
needle should sweep to about 12 volts. if this is correct then with ign on put black probe to battery negative and red probe to to each side of fuses. if one side reads 12+ and the other side dont then that fuse is blown.
keep in mind u will have extra fuses that will not move the meter.
u might try the accessory position if it has one?
 

maurice

Supercharged
Joined
May 2, 2020
Messages
241
Location
Tucson,AZ
Ride
2020 R3 GT
best way to check voltage\
now that u have the info on meter place red probe to battery positive and black probe to battery negative
needle should sweep to about 12 volts. if this is correct then with ign on put black probe to battery negative and red probe to to each side of fuses. if one side reads 12+ and the other side dont then that fuse is blown.
keep in mind u will have extra fuses that will not move the meter.
u might try the accessory position if it has one?
So is multimeter still set at 8oclock 12 on left side of pic, or now right side that has BATT? Thanks
 
Last edited:

TURBO200R4

stand up straight and grab the world by the a$$
Joined
Jan 24, 2013
Messages
5,167
Location
TUCSON AZ
Ride
07 rocket III classic
like kipper said left side 12 (eight o'clock position)
u should check bat volts to make sure your meter works.
 

kipper

Turbocharged
Joined
May 28, 2010
Messages
810
Location
Scotland
Ride
08 CLASSIC,09STANDARD,05VALKYRIE RUNE,
The batt side is for checking small batts like torch or batteries from your tv remote.
 

dougl

Living Legend
Joined
Sep 11, 2005
Messages
2,322
Location
Reno, NV
Ride
2007 R3 Classic
What’s the voltage across your battery. It should peg at 12v but you might try putting it at the 60v setting.
 

TURBO200R4

stand up straight and grab the world by the a$$
Joined
Jan 24, 2013
Messages
5,167
Location
TUCSON AZ
Ride
07 rocket III classic
check your adapter with the ohms setting upper left`X1k setting. touch probes together the needle will go probably all the way to the right. any way the same will happen when u touch the correct contacts on the adapter.

i have a tool that will check that out pdq.
 

maurice

Supercharged
Joined
May 2, 2020
Messages
241
Location
Tucson,AZ
Ride
2020 R3 GT
check your adapter with the ohms setting upper left`X1k setting. touch probes together the needle will go probably all the way to the right. any way the same will happen when u touch the correct contacts on the adapter.

i have a tool that will check that out pdq.
Just as you said needle moved to the right with probes together, and adapter. Still doesn't help since bike socket has no power.🤔
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Ad-blocking software does a great job at blocking ads, but it also blocks some useful and important features of R3Owners. For the best possible site experience please take a moment to disable your AdBlocker for R3Owners.Net.

I've Disabled AdBlock