Leatherlyke bags

brtr628

Standard Bore

Joined

Mar 26, 2008

Messages

9

Location

Martinsville Indiana

• Aug 20, 2008

• #1

I got a set of leatherlyke bags for my Rocket 111 and the passenger pegs are too close to the front of the bags. I looked at the relocation kit by Rivco but it said they are for their floorboards. Will it work with pegs or is there another option?

Thanks
Bill

 

NativeOne

Supercharged

Joined

Mar 6, 2008

Messages

306

Location

Texas

• Aug 20, 2008

• #2

The relocation kit will work with the stock pegs. The kit comes with the spacers required and the screws necessary to make it work. Just remove the stock pegs and their mounts and attach them to the relocation arm instead of the footboards.

Native One

 

brtr628

Standard Bore

Joined

Mar 26, 2008

Messages

9

Location

Martinsville Indiana

• Aug 20, 2008

• #3

Thanks guys, may try to make myself. Thanks for the close up pic. If I screw them up then I can buy them.

Thanks Again
Bill

 

Geek_Law

Supercharged

Joined

Jul 15, 2008

Messages

255

Location

Cornelius, OR

• Aug 20, 2008

• #4

idk said:

I made these with less than $4 in materials and an hour or so of time.

Click to expand...

Nice work. You should post a "how to" with a few close ups. I always prefer the DIY route, but am not sure where to start sometimes.

-SKH