Good lift points?

[Mittzy]

Tony,
Actually, I have grown to like the plain old Matte primer look. No fuss - no muss and no worries if it gets scratched up a little. My 2012 R3R is a rider and not just another pretty showmobile.

I'll be keeping it simple and staying with the black and adding stripes like the 2013 & 2014 models; except I'm not doing them in white or red; but, bright yellow just to screw with the herd a tad.

Thats cool - I really like that idea.

 

[MikeDeY]

Here's what I did once:

 

[cootertwo]

Now that's a nice rig. Where'd you get it?

 

[albertaduke]

So far two of us are leaving Tacoma, WA the 19th and riding to
Pasco, WA to visit Rocket Roger. The 20th we ride to Nampa, ID
to meet Idaho Red Rocket. The 21st we have a long ride (500mi)
to Vernal, UT to meet Rolltide and a guy from Wyoming (I forget his handle).
The 22nd is a short ride (200mi) into Montrose, CO.

how do we hookup in nampa , I am thinking drive to nampa and ride from there!! I got a cheap cellphone service 403 689 5936 alternatively an address and a phone in nampa would just do the trick . also could i leave my truck in idaho red rocket yard in nampa?

 

[1olbull]

Great news! Would enjoy hooking up with you.
I'm sure it would be no problem and shall check with him right away.
We are planning dinner together that evening; so, I would suggest an arrival to Nampa by 4 PM or so.
Which route are you considering?

 

[albertaduke]

Great news! Would enjoy hooking up with you.
I'm sure it would be no problem and shall check with him right away.
We are planning dinner together that evening; so, I would suggest an arrival to Nampa by 4 PM or so.
Which route are you considering?

have to look up google map I guess the most direct from calgary south crossing border at bonner;s ferry south to sandpoint then coeur d'alene, moscow grangeville weiser US 84 to nampa 700 miles and changes unles somebody has a better idea.

 

[1olbull]

Here's what I did once:

Sure wish I had a few young bucks to do the heavy lifting in my garage!

 

[1olbull]

Sent off a PM to Bill about your truck.
Too bad you won't be on your motor, that 97 eastern route around Lake Coeur d' Alene is a sweet ride.
The Rattlesnake Canyon, 129 and 3 from Lewiston, ID to Enterprise, OR is an even better ride.

 

[albertaduke]

Sent off a PM to Bill about your truck.
Too bad you won't be on your motor, that 97 eastern route around Lake Coeur d' Alene is a sweet ride.
The Rattlesnake Canyon, 129 and 3 from Lewiston, ID to Enterprise, OR is an even better ride.

fear not I may well do them in july

 

[1BigDog]

Thanks for all those responses. I now have a much better idea about what I have to do to modify my lift for the R3T. I really like that adapter plate from someone in England but I also like the modded jack with the brackets welded to the riser. Ill be ordering the center lift from Flipmeister in the near future and ill make something for when I have to change my tires. Theres enough mileage on the Metzelers to make it through to next winter. Most likely ill go with Avon Cobras and Dyna Beads next time.