Gentlemen, need your help - Gauges

[Blastedbones]

Not seen that one before but there's a few here who've done the digital gauge thing.

 

[owl]

Can't help with canbus, but this thread might help re sorting out what wire does what




I have a Translogic digital system fitted to mine..........

http://www.translogicuk.com/micro-dash.php

but I got someone else to fit it.

I know a few of the Brit riders have digital dashes from other manufacturers, so it can be done.

 

[owl]

When I bought this dash, I telephoned Translogic, and they did not know if it could be fitted to a Rocket.

They had a hotline to Triumphs head techie - they called him up and he supplied the necessary information to them, and Translogic passed it on to the workshop who were going to fit it for me - great service.

 

[magna_swede]

Cheer up Ro6ert! You will end up as the one who knows.... [emoji6]

 

[cr0ft]

Just so tired of no one knowing anything about the bike. Will probably not buy triumph again.

I kind of like that it's a bit different. Then again, I'm not removing the dash and stuff, usually, or customizing to that extent.

I'd rather have a Rocket with stock dials than another bike with custom dials.

 

[owl]

A guy I know has recently fitted a Dakota dash to his Rocket - said it was quite straightforward.

I can put you in touch with him if you want, ro6ert.

http://www.dakotadigital.com/index..../category_id=60/home_id=60/mode=cat/cat60.htm

 

[owl]

Will do - I have emailed him, and if he is OK about it, I will pm you his address.

 

[barbagris]

Pre Roadster there should be no problems AT ALL. No CANBUS. A MotoGadget Mini should be no issue at all.

 

[TriumPhil]

A couple of fellas' have fitted the Dakota gauges over on this side of the pond, too, ro6ert. Just from the standpoint of factory support, I would think that would be the best way to go. They have a well established track record.