Floorboards or Pegs

pjl52

.040 Over
Joined
Aug 6, 2009
Messages
77
Location
Queensland Australia
Been debating with myself (a one sided debate) whether to change from pegs to floorboards on my 08 standard, I recently went for a ride on an R3T and found the floorboards more comfortable than what I thought they would be.

What do you guys think of the floorboards versus the pegs, replies from owners that have had both would be of particular interest? Also, opinions on OEM versus Kuryakyn or Rivco would be helpful.

Thanks

Peter
 
pete,
I started out with an '07 standard.
Bought the floorboards as soon as I could.
Wouldn't go back, no reason to.
Kind of like a darkside tire,
The change was good and I won't be going back.
 
Floorboards . For cruising they're the best. If my Rocket was set up more for sport riding the pegs might be the better choice.
 
floorboards also have had both and the boards are more comfortable especially on long rides
 
Boards are the way to go have over 4K on mine only had to change the warning nuts on them once. But then I drive mellow
 
Okay, it sounds like floorboards are the way to go for my riding style, has anybody used the Rivco or Kuryakyn boards or is OEM the way to go.

Oh and a recommendation of where to purchase would be appreciated, bike bits are expensive and choices limited in Oz!

Thanks

Peter
 
The ideal set up would be the factory classic or touring boards, but that requires replacing the bars and everything. Some guys here have swapped parts but other than that it's aftermarket. I've asked around about Rivco boards but not many have done the conversion or didn't have any comment. Whatever you decide to go with, I'd be grateful if you post your results and how you feel about them. I'm wanting to go to boards myself.
 
No worries happy to do so, might be a little while though until I get the Christmas bills out of the way!

Peter
 
Kuryakyn Switchblades

Have you considered an "in between" option like the Kuryakyn Switchblades? I put 'em on my '07 Standard and love'em. When I'm gettin' on it through the twisties I leave them folded up and they still have a larger foot contact area and are MUCH more comfortable than the stock pegs. When I'm cruising/touring, I unfold the heel "stirrup" thingie and they're almost as comfy as the floorboards on my ElectraGlide. Much cheaper and easier to install than the 'boards.
 
You must log in or register to reply here.

Similar threads

Impressive or Excessive
Replies
0
Views
183
stingray
20 or so odd ducks from 2025 Mecum Motorcycle Auction
Replies
6
Views
1K
Idaho Red Rocket 3
Motorcycle model 'Names' or Technical Alpha Numeric?
Replies
0
Views
463
Ishrub
Do motorcycles have character or soul?
2
Replies
13
Views
2K
Tripps
Radial or Bias....Thoughts?
Replies
4
Views
986
jake shaw
Menu
Log in
Register