Clear service due wrench with TuneECU?

EskimoPie

Supercharged
Joined
Dec 1, 2020
Messages
446
Location
Sahuarita, AZ
Ride
2021 Rocket 3 GT
Hey, can you use TuneECU to change the service interval and clear the wrench indicator from the dash or can that only be done via the dealertool? I fired up TuneECU and didn't see how to but a Google search implied it is possible.
 
Yes it's possible alright. I've seen posts on this site referring to it. However, I personally use a scan tool not TuneECU, so I'm no help other than I know TuneECU does do it.
 
To reset the service interval with TuneECU:
  1. Ensure you've set the time and date correctly in the bike's display.
  2. Connect TuneECU with the ignition on.
  3. From the "tables" page, swipe left to either the Dashboard or Adjustments page.
  4. From the menu in the upper-right corner (ECU?), select "Tests & Adjustments".
  5. From the "Test Devices" window, select "Adjustments" from the bottom-left corner.
  6. From the "Adjustments" window, select "Reset Service Interval" then select "Run" from the bottom-right corner.
  7. Select Km or Miles, set the desired updated service interval, then select "Validate" from the bottom-right corner.
There might be a step or two after that, but I didn't want to reset mine in the process.
 
You must log in or register to reply here.

Similar threads

R3GT TuneECU Connection
Replies
7
Views
300
atomsplitter
TuneECU be a fickle *****!!
2
Replies
14
Views
593
Protonhound
Cruise Control and TuneECU
Replies
0
Views
370
atomsplitter
Tuneecu post settings
2
Replies
18
Views
1K
dougl
Service Wrench Question
2
Replies
17
Views
1K
WitsRocket
Menu
Log in
Register