Pig9r
Living Legend
Hombre - send them my photo.
Carbon Fiber Swingarm
- Thread starter hombre
- Start date
hombre
Nitrous
- Joined
- Dec 31, 2006
- Messages
- 1,021
Bump... I'll be posting the photo of the magnificent BST CF swingarm-hugger shortly. Almost an exclusive, as even the major bike rags have not published this photo. Of course, R3Power network gets it first!
A certain famous make of sportbike receives the first CF swingarm ever designed and produced in the world. Getting the second made for the R3 would be an incredible coup.
A certain famous make of sportbike receives the first CF swingarm ever designed and produced in the world. Getting the second made for the R3 would be an incredible coup.
hogweed
Supercharged
them thar wheels look the dogs bollocks
hombre
Nitrous
- Joined
- Dec 31, 2006
- Messages
- 1,021
If you like the wheels, check this ****e hot swingarm!
BST is producing this swingarm-hugger for a certain model sport bike. Obviously the R3 CF swingarm will not be single-sided, but will certainly be as sleek and lightweight:
The R3 CF swingarm will cost $3200 direct from BST. We need 20 buyers to pre-pay a $2000 deposit to BST for them to begin design and mold work. Thus far we have 9 confirmed buyers. No deposits are to be sent to BST until we have the entire group of 20 to make the project viable. BST estimates 6 months to delivery once work begins.
Naturally I realize few "cruiser R3 owners" will be interested, but for the few advanced custom or racing R3 owners this is a chance to join the cutting edge of high tech motorcycling. PM me with your email address if interested.
BST is producing this swingarm-hugger for a certain model sport bike. Obviously the R3 CF swingarm will not be single-sided, but will certainly be as sleek and lightweight:
The R3 CF swingarm will cost $3200 direct from BST. We need 20 buyers to pre-pay a $2000 deposit to BST for them to begin design and mold work. Thus far we have 9 confirmed buyers. No deposits are to be sent to BST until we have the entire group of 20 to make the project viable. BST estimates 6 months to delivery once work begins.
Naturally I realize few "cruiser R3 owners" will be interested, but for the few advanced custom or racing R3 owners this is a chance to join the cutting edge of high tech motorcycling. PM me with your email address if interested.
Sidecar Flip
Living Legend
That is a work of art... parts ****
There must be some way I could get a Gov't grant to purchase that, possibly a "Cash for Swingarms" program. Hey, as long as were all going to be socialists it won't hurt to try.
If you are gonna try 'cash for swingarms' then I want 'Fiat Notes for Nortons'. Particularily a '67 P11A High Pipe Scrambler.....
That stuff is just too high zoot for me. My juices get flowing over Amal and Lucas and cake tins under the crankcase to keep oil off the floor. I get excited over Girling shocks and Reynolds Chains. There is nothing better in life than riding in a blizzard of nuts and bolts as your fine British bike vibrates itself apart as you ride it, merrily spewing oil froth out of the breather tube under the tail light and depositing it on following automobile windshields.
That's motorcycle **** to me.
scot in exile
Living Legend
Shoot Flip I am going in to take a cold shower now
hogweed
Supercharged
hombre ,how are the rear sets held on
RatBoy
Turbocharged
That is a work of art... parts ****
There must be some way I could get a Gov't grant to purchase that, possibly a "Cash for Swingarms" program. Hey, as long as were all going to be socialists it won't hurt to try.
Hey, maybe if you write the Prez, he'll take $1 from everyone else so that you can have that swingarm at no-cost to you!!!
Obama-olitics are it's best.
sassybigboy
.020 Over
Photo
Hi could you mail me a copie of the swinging arm photo as I cant seem to open it at work i've got to see what it looks like Carbon looks the nutt's on anything
Best regards
Sas
sashunter@tiscali.co.uk
Hi could you mail me a copie of the swinging arm photo as I cant seem to open it at work i've got to see what it looks like Carbon looks the nutt's on anything
Best regards
Sas
sashunter@tiscali.co.uk
If you like the wheels, check this ****e hot swingarm!
BST is producing this swingarm-hugger for a certain model sport bike. Obviously the R3 CF swingarm will not be single-sided, but will certainly be as sleek and lightweight:
The R3 CF swingarm will cost $3200 direct from BST. We need 20 buyers to pre-pay a $2000 deposit to BST for them to begin design and mold work. Thus far we have 9 confirmed buyers. No deposits are to be sent to BST until we have the entire group of 20 to make the project viable. BST estimates 6 months to delivery once work begins.
Naturally I realize few "cruiser R3 owners" will be interested, but for the few advanced custom or racing R3 owners this is a chance to join the cutting edge of high tech motorcycling. PM me with your email address if interested.
