Cable not showing when connected to computer

GaryA

Supercharged
Joined
Apr 19, 2017
Messages
242
Location
Geelong
Ride
2010 Triumph Rocket 3 Roadster
I have started, downloaded and installed TuneECU.
Now the cable, downloaded and saved drivers, disconnected the internet, plugged in the cable but no dialog boxes cam up.

Should something have shown on the computer saying I had connected something and where are the drivers?

Its Windows 10 as well.

Any ideas on what has gone wrong?
 
Does the PC make a sound?
If it is a Lonlec cable it would have instructions for setup
 
That would be a dedonk sound when you plug the cable in to the computer whether its hooked up to the bike or not
 
Okay, no sound, but I usually have the sound turned down.
It is a lonlec cable, ordered in from the UK if I remember correctly.
I'll have another play this evening and chase these things up.
 
Watching with interst. Since I've upgraded my laptop to Windows 10, my Lonlec cable hasn't wanted to connect either.
 
Go here >>> D2XX Direct Drivers
Click this, in red oval


Install the program you just downloaded

Connect cable to computer
Hit Windows and X key at same time
Click Device Manager
Double click Ports (COM & LPT)
Double click USB Serial Port (COMx) x can be any number, depends on the number of COM ports you have used
Click Driver tab
Check Driver Version is same as you installed

Open Tune ECU
Click Options
Click Interface
Click USB
Click FT232R USB UART This should put a checkmark before FT232R


AFTER all of that, connect to bike
 
Last edited:

Ah ha, now that is instructions!

Thank you WyldCHH, I will do that and let every one know.
 


As Wild says.

Win10 has forced driver assigning so if you simply plug in the cable windows assigns it a driver (the wrong one) you need to install the drivers for the cable and it will work. Frustrating but they are trying to make things simple for the masses.
 
Thank you all, I think the cable and driver is now working.
Next is to try connecting it all up and giving the HansO tune a go.
 
Steel said:
Watching with interst. Since I've upgraded my laptop to Windows 10, my Lonlec cable hasn't wanted to connect either.
Click to expand...
I’ve tried yesterday to hook up tuneecu I may have lost my original tune not sure can’t connect I have a dong sound with the Wright cable , I’m using windows 7 can’t seem to connect to ecu I have a 2007 r3 classic, delete cat and Dain slip on pipe ? Idk trying again today bike runs but Im Afraid she’s lean
Oh ya had a dealer install fog lamps now they won’t come on power to relay and switch side works I can power load side of relay and make lamps work is there anything lease for power side of relay switch since it gets power from wiring harness
 
You must log in or register to reply here.

Similar threads

Unable to read map, cable driver timing out.
Replies
1
Views
326
atomsplitter
Tuneecu not connecting to OBD Link LX101 2.1
Replies
8
Views
1K
Olivier
Trying to source 20514Map.hex
Replies
0
Views
98
Maffoo
How to obtain Tuneecu license file? New tablet on android 13, PayPal is not working….
Replies
6
Views
2K
atomsplitter
I tried to find information. Stock 2014 tune/map
Replies
8
Views
302
JaR3d85
Menu
Log in
Register