cover
There is nothing, front and back, on my bike to line up with the holes. All I see near the holes are the gold colored annodized shcs that go into the fram to attach the plastic covers. Neither of them are near the brackets or at the right angles.
I do see the two holes in the tank bracket, but some part is missing there too.
The schematics just dont go into that detail. Does anyone have part numbers.
If somebody doesn't mind; go to www.bikebandit.com and look at the parts lists, maybe you can tell me which ones I need.
15: FLANGED SLEEVE
SERIAL NUMBER 161317 AND BELOW - M6
5575783-001
$2.59
15: FLANGED SLEEVE, PLATED
USE WITH FOAM SEAL PART NO.3660117 - T0301
5575790-001
$3.02
16: BOLT,M6 X 20
M6 X 20MM BLACK
5558871-001
$0.70
16: BOLT M6 X 25
M6 X 25MM BLACK
5558873-001
$0.70
17: BOLT, M6 X 12
M6 X 12MM BLACK
5558870-001
$1.39
18: GROMMET,DIA11.8X4.0
5575831-001
$3.28
19: COVER,AIRBOX,CHROMED
5571113-001
$112.29
20: CLIP, LOCATION
5571120-001
$2.77
21: PLUG, THREADED, M10X1.25
5571121-001
$4.56
22: GROMMET
18MM X 4MM