Bear claw fitment

[dunringil]

My bike had the intake cover removed when I bought it.

I am trying to fit it back on the bike but can't quite figure how it bolts up.

The stock airbox has been replaced so some things have changed.

Been looking at diagrams in the service manual and at www.bikebandit.com but can't seem to locate the mounting points.

 

[KC000]

Theres a 10mm bolt front and back that line up with bike front to rear and a rubber grommet thingy that clips onto a metal projection off the underside of the tank.

 

[dunringil]

cover

There is nothing, front and back, on my bike to line up with the holes. All I see near the holes are the gold colored annodized shcs that go into the fram to attach the plastic covers. Neither of them are near the brackets or at the right angles.

I do see the two holes in the tank bracket, but some part is missing there too.

The schematics just dont go into that detail. Does anyone have part numbers.

If somebody doesn't mind; go to www.bikebandit.com and look at the parts lists, maybe you can tell me which ones I need.
15: FLANGED SLEEVE
SERIAL NUMBER 161317 AND BELOW - M6

5575783-001
$2.59
15: FLANGED SLEEVE, PLATED
USE WITH FOAM SEAL PART NO.3660117 - T0301

5575790-001
$3.02
16: BOLT,M6 X 20
M6 X 20MM BLACK

5558871-001
$0.70
16: BOLT M6 X 25
M6 X 25MM BLACK

5558873-001
$0.70
17: BOLT, M6 X 12
M6 X 12MM BLACK

5558870-001
$1.39
18: GROMMET,DIA11.8X4.0

5575831-001
$3.28
19: COVER,AIRBOX,CHROMED

5571113-001
$112.29
20: CLIP, LOCATION

5571120-001
$2.77
21: PLUG, THREADED, M10X1.25

5571121-001
$4.56
22: GROMMET
18MM X 4MM

 

[Multibob]

Fuel tank and fitings ITEM 11 and 12 looks correct.

 

[dragline708]

Deleted

 

[dunringil]

Thanks

Thanks guys, I had no idea, since I've never seen the thing and the pics are missing.

The center of the cover has a bracket with one threaded hole in it. While the corresponding tank area has two holes in a bracket under the tank. There is nothing in the holes on my bike.

I need one more piece, it spans the distance between the two holes.

I think I spotted it in the service manual. Exploded view of the airbox 11.10, but I have no Idea where or if it shows up at bike bandit. no pics.

I am guessing maybe part 20 & 21 from the airbox diagram, no pics.