Does anyone have any idea how to remove the rectangular rubber instrument lamp sockets? I've pried and pulled hard, just short causing broken stuff lol.
Hello all!
Can anyone tell me how to remove the rectangular rubber instrument lamp socket from the tachometer? I've tried and pulled to the point of being very close to breaking something lol.
I have a 2005 Rocket 3, bought new. No issues except the instrument cluster goes dead every once in a while. The bike continues to run fine without the gauges. I found that if I stop and shut down the bike and restart, the gauges will start working again. This only happens every 5-6 hundred...
I am a long time owner of Rockets but just picked up a new 20205 GT. Currently it is stuck in the dark night mode and I cant figure out how to change it. Is there something in one of the menus that will allow it to go to the white screen in the daylight? I looked in the manual but came up with...
My instrument panel does not seem to be as snug as I think it should be. If I adjust it up, it will work its way to the low position when riding. The 2 hex screws at the pivot point seem to be tight. Any suggestions?
Hey everyone,
I have Rocket Storm 3 R 2025 and have noticed that the instrument cluster moves vertically depending on acceleration and braking. I took it to the service center, where they tightened it, but even after that, it still shifts while riding.
Has anyone else experienced this issue...
Hi guys,
I have a 2008 R3 Classic which is going through some modifications. I'm now replacing the instruments and cant figure out 4 of the 5 cables between the instrument and the ECU. Can someone please help me?
Pin 1 - Red going to ECU pin B14. This would be the tach I guess.
Pin 4 -...