1. Fixitbaz

    Over Temperature Indicator & Engine Management light

    My Over Temperature Indicator & Engine Management light is on but the R3 is not running hot :confused::confused::confused: Even when the R3 is stone cold when I start it the over temp warning and the engine management light is on also the cooling fan is running. I have tested the R3 with an...
  2. Jim/Maine

    Engine stumbling

    Just had my 500 mile service and mentioned to the dealer that there was a fairly significant stumble, surge, and otherwise not smooth engine run in the low to mid 2,000 rpm range, most noticeable in first and second gear. Sometimes I hear what sounds as a internal clank like a chain noise. So...
  3. Lack of engine braking Roadster

    have a late 2010 Roadster with onlu 4500kms on the clock, and it seems to lack engine braking when heading for a corner.................by this I mean when I shut the throttle off it seems to hold it's rev's up, without slowing much at all A bit un-nerving when flying into a corner and then...
  4. rocketeer

    Looking for an engine

    While passing a car on a mountain pass, my transmission broke. I made it to the shoulder and as I tried to downshift, my rear wheel locked entirely. I just got the word from the shop that they started the diagnosis and found many pieces of gears in the lower part of the engine. They say it may...
  5. Akita Man

    Rivco Engine Guard Mounts

    Has anyone tried to mount one of these (Rivco Engine Guard Mount) to the factory foot peg rails/mounts on a std Rocket at the foremost area of the rail where it is perpendicular to the engine (in front of the foot brake and shifter)? It would be a neat and tidy way to install a highway peg...
  6. TriumPhil

    No, Not railroad engineers, Hellfire

    It's that time of year again... my riding time is up! Enjoy: how unemployed engineers open their window shades in the morning... http://www.chilloutzone.de/files/player.swf?b=10&l=197&u=ILLUMllSOOAvIF//P_LxP92A42lCHCeeWCejXnHAS/c
  7. UK : Advice needed - blown engine

    First off, as a member of another bike site (bonnevilleamerica.com) I know it's a pain if same old threads crop up so apologies if this has been done to death ... I have owned my '08 R3 from new and it has only 8134 miles on it. At about 3500 miles it developed a gear change problem (hence the...
  8. Engine wanted for replacement

    Hi guys Par (Nussekudden) just broke the crankshaft (!!??!!) on his R3 with turbo So now he's looking for an replacement engine Anyone out there who knows where to find one? Insurance companies? Ebay? Others? Please give us tips on: nickehild@gmail.com
  9. Engine light

    I just removed the secondaries and now my engine light came on, is this normal? At first it wouldn't start but smoothed out, now in the progress of 12 minute tune. Will the light go out?
  10. PhillyRoc

    Engine Light After Removing Secondaries

    Hello fellow rocketeers, just want to send a warning to all of the newbies like myself :confused:about removing the secondary butterflies. The information given on this subject (secondary removal) is 100 percent accurate. It will take you an hour for twenty minutes of work if you keep the stock...
  11. Engine starting to run badly...

    Hi there, New R3 owner here! Just bought a 2007 Classic in blue/white with approx. 4,000 miles. I've owned pretty well every type of cruiser and sport bike, but this is my first Triumph. So far I'm pretty happy with the bike's performance, looks, handling, etc., but then again I've only had it...
  12. high speed engine failure?

    i have been searching the forum for documentation of any of us that have had the output shaft bearing or the cam chain fail @ speed. read a couple stories of the camchain failing @ stoplights. not too exciting, although pretty f***ing inconvienient! i can only imagine what sort of life...
  13. BigRed

    Check engine light ON

    After changing my battery the engine fault light is on at the lower left of the speedometer cluster. What all does this light indicate?
  14. Help Please - Rivco or Tiump OEM Crash Bars/Engine Guards?

    Help Please - Rivco or Triumph OEM Crash Bars/Engine Guards? Hi folks - I just posted on classifieds looking for some Rivco engine guards - and HellFire suggested we start a thread so we can all benefit from some opinions... Anders .020 Over Join Date: Sep 2009 Location: St Petersburg...
  15. Willtill

    Engine mounting bolt question

    Hey ya'll.... I just got done fighting and wrestling with my new Rivco engine guard bars and finally came out on top :D . I guess I'm the guy who always gets engine guards that don't "quite" line up correctly, even after dutifully following enclosed instructions. Ended up having to use a...
  16. Engine Oil Operating Temps

    I first apologize if this info is available in a service manual but my used R3 did not come with one but I was just wondering as to the "normal" oil operating temps and do they vary with the type of oil being used. I am in Thailand and it is always hot here and the bike gets to be quite warm...
  17. Very HOT engine

    Does anyone else have an issue with the engine getting really hot, to the extend that even the frame and side panels get too hot to touch? Also, I can see the exhaust elbow right below me glow red in the dark! Any input anyone? Thx. Ruud
  18. engine missing!!

    recently my bike has started missing when on the throttle! starts around 4500rpm, will miss then clearup then start again! anyone have any experience with this? 2008 standard rocket, cutout bearclaw, K&Ns, Jardine exhaust, Tuneboy!
  19. pjl52

    Clacking Rocket Engine

    Have just bought my R3 and have only done about 800kms (500miles) since new the engine has produced a soft clacking sound (sounds a bit like gear backlash) during acceleration up to 2000 rpms and then goes quiet from there on. My dealer has said that this is common to the R3, is he right or...
  20. Noisy Engine

    Anybody had any problems with a horrible noise coming from the timing chain tensioner area/ front of the engine??. My bike is an 05 with only 6000 miles on it. A little suprised that this machine can,t last more than this with out a major engine problem. I,ve already suffered a noisy leaking...
Back
Top