Search results for query: *

  1. glenn-iocb

    Retrofitting Slip Ons (Exhaust Mod)

    or 300£ for the second hand ones...
  2. glenn-iocb

    Retrofitting Slip Ons (Exhaust Mod)

    http://www.ebay.co.uk/itm/TRIUMPH-ROCKET-3-ROADSTER-CUSTOM-SILENCERS-/271459843766?pt=UK_Motorcycle_Parts_13&hash=item3f34447eb6 here you go, i know of a pair of used ones also... even cheaper.
  3. glenn-iocb

    Is the Rocket III for me? Hi from Canada!

    hey ricochet, my previous bike was a M109, and the one thing i didn't like on it where those cheap plastic bodyparts, you wont find those on the rocket... also, i tried the removable backrest from the M109 on the roadster, but it requiered drilling holes etc to put the mounting points onto the...
  4. glenn-iocb

    lil help please

    dont remove the headlight fuse in a roadster, that fuse is needed when you put a tune back into the computer. (roadsters have different fuse lay out than the other rockets)
  5. glenn-iocb

    2011 Rocket III Roadster sputtering/missing during a constant RPM on road

    well at least a flat tire is easy to diagnose, and now you know of the stupid coil connection thing you are almost set on going on a problem free bike trip. glad i could help. greetz glenn
  6. glenn-iocb

    2011 Rocket III Roadster sputtering/missing during a constant RPM on road

    had that also and it was a loose connection on the coils, sometimes it ran fine and sometimes stuttering and driving like ****. those cheap ass connectors on the coils tend to get loose every 2-3000km in my case. so every month i take em off (the connectors) pinch em together with pliers, and...
  7. glenn-iocb

    2013 R3R Exhaust Options?

    homemade exhaust, 50mm linkpipe, and 2 laser duotech carbon pipes.
  8. glenn-iocb

    Anyone Chg out the handlebars? How about for Tbars?

    yes its a roadster, and yes i had to make a clamp to fit the clocks onto the risers. but that was fairly easy to do. o and i relocated the original brakelines etc but that is also easy to do, i didnt have to disconnect anything. these are the ones from thundebike.nz, powder coated black.
  9. glenn-iocb

    Anyone Chg out the handlebars? How about for Tbars?

    i installed these and i am VERY happy with them, i combined them with rivco risers.
  10. glenn-iocb

    loose coil connections

    recently my rocket (2010R3R) started caughing on accelleration, and running real rough and after a few days i checked the connections on the coils. those connections were LOOSE, i mean normaly it takes some "force" to slide the connector off off the coil, but not this time. :mad: so i...
  11. glenn-iocb

    custom exhaust and linkpipe for rocket roadster

    will do canberra, but may take a few days... don't know if you noticed the supercharger, so a comparison over stock hp can't be given, but i'll post anyway. the used tubing is 50mm diameter, the exhaust inlet is 60mm. so i hope the shop gets it fully tuned and installed and ready next week... ;)
  12. glenn-iocb

    custom exhaust and linkpipe for rocket roadster

    don't know yet steel, they put it together today, but didn't dyno it yet. :rolleyes: hope to hear from them soon :D
  13. glenn-iocb

    custom exhaust and linkpipe for rocket roadster

    heyhey, welded a new linkpipe 4 the roadster cause the original is pretty restrictive, and attached 2 laser duo tech pipes.
  14. glenn-iocb

    head gasket

    had to replace head gasket also (roadster) an the bill was 1200€ at my local triumph dealer. 900€ for labor and 300 for gasket and oil and little bits here and there. took em 3 days, after the gasket was in stock.
  15. glenn-iocb

    Black Radiator Caps

    Triumph Parts Locator » World of Triumph parts for radiator cover r3t numbers: PFKL1206686-87-88-89 Triumph Parts Locator » World of Triumph perts for radiator cover r3r numers: PFKL1206686-87-88-89 same numbers so i guess same parts, and interchangeable. :D
  16. glenn-iocb

    ROX Handle Bar Risers

    hey, got the thunderbike bars on my '11 roadster, and like they state, the bracking which comes with the bars are not good for the roadster. i made up a bracket of my own. even tho the bracket must be fabbed up, i wouldn't want it any way else anymore, those bars are great! in this pic you...
  17. glenn-iocb

    ROX Handle Bar Risers

    i have mounted rivco risers and the thunderbike bars on my 2011 roadster, the only 2 things i had to do was make a new bracket for the instruments (not that hard) and reroute the original cables (brake and clutch) the thunderbike bar is not as wide as the original, so maybe when putting on just...
  18. glenn-iocb

    Roadster & Thunderbike?

    i did specify it was for the roadster and they sent me a mail telling me they didnot have a bracket for the roadster and i could remove the order or not, but then they would sent it without a fitting bracket. and i tought well, how much work can a simple bracket be eh... so i ordered it anyway...
  19. glenn-iocb

    Roadster & Thunderbike?

    well, the thunderbike bars can be tilted backwards alot, but then you have to mount the gauges on top instead of under the bars. recently i added the rivco risers to the thunderbike bars and because it makes the bars sit higher, you can rotate them down a bit, which results in the bars being...
  20. glenn-iocb

    Single best mod

    homemade backrest: and higher risers and different handlebar with gipro:
Back
Top