Wiring for rear indicators

RocketManCleveland

Standard Bore
Joined
Feb 15, 2020
Messages
5
Ride
2020 3R
Can anyone please give me some advice on how to correctly wire my rear blinkers? I’ve come so close but never fully complete. Any assistance much appreciated. See attached

the 6 wires (3 black, 2 green and 1 yellow) are from the existing wiring on the bike removed from the swing arm.

The 3 on either side are the indicator wiring (red, black and yellow). Thanks
 

Attachments

  • 426D2DD7-72E8-437C-BA10-D6279A95BF25.jpeg
    426D2DD7-72E8-437C-BA10-D6279A95BF25.jpeg
    244.6 KB · Views: 18
  • 868CDBC6-D099-4F34-BCDC-4BF9D1D4D6F8.jpeg
    868CDBC6-D099-4F34-BCDC-4BF9D1D4D6F8.jpeg
    264.3 KB · Views: 19
  • 3878B8CA-BE67-4D9A-8829-D75B79E09CD5.jpeg
    3878B8CA-BE67-4D9A-8829-D75B79E09CD5.jpeg
    222 KB · Views: 18
Can anyone please give me some advice on how to correctly wire my rear blinkers? I’ve come so close but never fully complete. Any assistance much appreciated. See attached

the 6 wires (3 black, 2 green and 1 yellow) are from the existing wiring on the bike removed from the swing arm.

The 3 on either side are the indicator wiring (red, black and yellow). Thanks
Blacks are all ground/0v
Green/Red left and Green/White right turn signals @12v/0v flashed on/off respectively by ECU
Yellow is licence plate light @12v switched with ignition
 
Last edited:
Back
Top