We All Need to Do Our Part

britman

Nitrous
Joined
Sep 8, 2006
Messages
1,403
Location
Fredericksburg, Virginia
Ride
2005 Rocket 3/2014 Moto Guzzi Touring
I installed my Pod's today and with the current "Going Green" movement I found a use for the old plenum. A multi function drink holder. Flip will probably make one out of stainless steel and make a fortune. BTW, there is plenty of room for ice in the bottom.
Link Removed
 
Anyway of covering your new drink holder with the bearclaw:D
My filtersx3 should be here by Monday or Tuesday so Sir Flip said.:)

Dave,

The claw actually went back on with no problem what so ever. I put the rear bolt in first, finger tight, the front one next pushing up and in on the claw and no problem. Tighten and away you go. It is a great time after all the plastic is removed to coat all of the connections you couldn't get to with electric grease.
 
That's great, George!

A side comment about the old school Triumph chopper in the back of the picture. RoadHouseCharley and I dropped by George's last Sunday and George fired up the chopper. Talk about music! It sounds really cool.

Speaking of sounds, the 3 of us need to get together again and record our exhaust notes. Charley with his Stock pipes w/ cat bypass, me w/ my Staintunes, and, of course, your Jars. We would need to track down someone local w/ TORs and we would cover most of them w/ the notable exception of Pred's.
 
It's only music if you're not 7 months old and/or trying to nap. :p
OK, time for the third 12 minute tune of the day. She might as well get used to it in this family. I have been searching the want ad's. This should be just about right at around 3 years old. You don't want to start them too early.
 
those things still fetch $1000-$2000 depending on condition. I watched one on ebay snag close to 3k restored.

the CRF 50s are cheap in comparison.


My child is partial to V4s anyway. :)
 
Back
Top