Want to Buy wanted rocket passenger floorboards

[Bernard Vinet]

Bernard, I can’t see the Rivco TA005-5 at Pinwall

Here the product number for them # 6826-01-552 they are there . 178.75$ US

 

[Bernard Vinet]

Here the product number for them # 6826-01-552 they are there . 178.75$ US

Go to their search , throw this number in & it brings you direct without searching.

 

[Ishrub]

Go to their search , throw this number in & it brings you direct without searching.

| Pinwall Cycle Parts, Inc | Your one stop, motorcycle shop for used parts, service, accessories, & apparel

Check out https://pinwallcycle.com! Pinwall Cycle Parts, Inc | Your one stop, motorcycle shop for used parts, service, accessories, & apparel

pinwallcycle.com

Yep, but not a RIVCO solution.
These are single headlight R3Touring rear footboards.
These will ALSO fit Dual headlight R3 and bring the passengers feet forward by a fair amount.

I explained in detail how in another thread.

Roadster just about done

Yes you just have to do some rerouting. You have to route them behind the triple tree.

www.r3owners.net

The rear boards appear to be steel chromed RIVCO version, which also sold the Chromed alloy ones. The big advantage of these RIVCO designs is the available extension to bring them fwd for even more pillion leg room.

The RIVCO ones are out of production now but you can fit a few other options:
There is another aftermarket extension version available. too. You can also fit a number of different rear foot boards from Kuryakyn with or without the stock peg mounts and splined adapters.

The ultimate strong rear footboards actually come from the R3Touring (and shared by a few other Triumph models over the years), which will bolt straight up to dual headlight R3s AFTER you remove the Chrome or Black peg mount bracket frame covers #10/#11. This exposes a second bolt mount hole that is the exact width from the single peg mount hole to allow bolting on the R3Touring rear footboards. With a little shimming and drilling a 2nd hole in the Chrome/Black frame covers it should be possible to re-fit them too.

Dual headlight rear pillion pegs, note use of the rear hole in rear pillion peg bracket frame in 2nd image below

Dual headlight frame note 2 holes in rear pillion peg bracket

R3Touring rear footboards. The identical L & R brackets #5 mount directly to the Dual headlight footpeg frame above.