All,
Very new to the site and my first
() post to the technical area...
My bike has 800 miles on it and I have 2 problems:
- My ignition is having a strange issue... When I picked it up from the dealer the igition worked normally. You had to pull in the clutch in order to start the bike with the ignition button. Then starting 2 days ago the bike will now automatically start when I pull in the clutch. E.G. bike it in neutral, I turn the key to "on", pull in the clutch WITHOUT pressing the ignition button, and bam the bike starts as soon as the clutch is pulled in. I have tried pressing the igition button in and out a few times in case it was just stuck but that does not seem to be the case.
- My throttle is sticking between 1/8 to 1/4 throttle. Just sticks there and does not return to closed throttle if I let go of it. Thinking something must be crimped or just sticking under the bars. Throwing this in there in case it is related to the above
I am going to call my dealer tomorrow when they are open, however they are ~100km away so I want to avoid having to take it to them if I can... I have a local generic bike shop that I trust that I would prefer to use if it is something small.
I am freaking out a little because I just imported this bike and have 40 days to get it safetied.
Any thoughts? Is this a known issue? Please help this worried Canadian out
Very new to the site and my first
My bike has 800 miles on it and I have 2 problems:
- My ignition is having a strange issue... When I picked it up from the dealer the igition worked normally. You had to pull in the clutch in order to start the bike with the ignition button. Then starting 2 days ago the bike will now automatically start when I pull in the clutch. E.G. bike it in neutral, I turn the key to "on", pull in the clutch WITHOUT pressing the ignition button, and bam the bike starts as soon as the clutch is pulled in. I have tried pressing the igition button in and out a few times in case it was just stuck but that does not seem to be the case.
- My throttle is sticking between 1/8 to 1/4 throttle. Just sticks there and does not return to closed throttle if I let go of it. Thinking something must be crimped or just sticking under the bars. Throwing this in there in case it is related to the above
I am going to call my dealer tomorrow when they are open, however they are ~100km away so I want to avoid having to take it to them if I can... I have a local generic bike shop that I trust that I would prefer to use if it is something small.
I am freaking out a little because I just imported this bike and have 40 days to get it safetied.
Any thoughts? Is this a known issue? Please help this worried Canadian out