Evil Mitch

LETS RIDE
Joined
Feb 6, 2010
Messages
4,219
Location
Brisbane Australia
Ride
2022 Triumph Rocket 3R
Hey guys just wondering if anybody can help me here im learning as i go

i have accidently pulled one of my vacume lines off i have one going to each throttle body and they all come back into a t piece connector but i have no idea where the line on that is meant to go and that is the one i need to re connect

cheers
 
On US models that vacuum line goes to a emission canister behind left side cover,hope this helps.
 
Found this in the manual so I'll have a look
20151218_201446.jpg
 
It is connected to the MAP sensor . this would have been in the plastic air intake manifold it has a wiring plug as well only small about 40 mm square and 15mm thick with a tube on the bottom side for the hose connection
 
Back
Top