Adriano
.060 Over
So I took my 2015 R3T out for a spin and everything was nice and dandy until I came back home after an hour or so of light cruising. I am a new owner and the thing still scares me enough to not abuse it.
As I was pulling on my driveway, I was in first gear and was about to maneuver so I can get it into the garage. Once I released the clutch slowly, the gear did not engage. I almost dropped the bike. I put it in neutral and then first again. Same thing, the gear would not engage.. same thing throughout all gears. I can hear the "clunk" noise but the bike is not going anywhere, it's not in gear. The linkage looks fine, I can see the clutch cable lifting the lever as I squeeze the clutch...is this something anyone experienced?
As I was pulling on my driveway, I was in first gear and was about to maneuver so I can get it into the garage. Once I released the clutch slowly, the gear did not engage. I almost dropped the bike. I put it in neutral and then first again. Same thing, the gear would not engage.. same thing throughout all gears. I can hear the "clunk" noise but the bike is not going anywhere, it's not in gear. The linkage looks fine, I can see the clutch cable lifting the lever as I squeeze the clutch...is this something anyone experienced?