I have a jar of Loctite Moly Paste(LB 8012) on the shelf waiting for the day I need to replace the rear tire and do the final drive lube. Seems to me I got the recommendation for it on this forum. You might do a search for it on the forum(s) to get details about it......might be an alternative to consider......have no idea about UK availability.
Drake has a decent reputation. So do MolySlip. If they are saying that it is a suitable replacement for the Honda Stuff - I would not even think twice, a 500g tub will last you forever. Moly Grease at 60% is NOT a multi-purpose grease so do not use it for bearings!.
I have a jar of Loctite Moly Paste(LB 8012) on the shelf waiting for the day I need to replace the rear tire and do the final drive lube. Seems to me I got the recommendation for it on this forum. You might do a search for it on the forum(s) to get details about it......might be an alternative to consider......have no idea about UK availability.
Drake has a decent reputation. So do MolySlip. If they are saying that it is a suitable replacement for the Honda Stuff - I would not even think twice, a 500g tub will last you forever. Moly Grease at 60% is NOT a multi-purpose grease so do not use it for bearings!.
Why rebuild? If my brakes get spongy and a lot of leaver travel - I just push the brake pistons all the way in to the bottom (After i have cracked the bleeder so the fluid has somewhere to go) then do a fluid change and pump the leaver up and the pistons back out to the disc - Dont pump the brakes up until the caliper is refitted with the pads in......
I did this just yesterday on my 2005 Turbo R3.
Is that Peter? Think you responded to me on FB too (much appreciated).
Bit wary that it has no branding even though it says it's Rocol on the text. I've emailed Rocol for them to confirm the stuff they sell is 60% Moly, if it is, there's 100g tubes for sale on ebay around £20
Pretty much my go to stuff...It hasn't let me down yet.
Bel-Ray Assembly Lube is a high Molylube solids content assembly lubricant. It is impervious to water and not affected by most acids and alkalis. It prevents galling and seizing of fasteners and press-fit components under high loads for later easy removal and disassembly. Its exceptional anti-wear and lubricating properties will minimize wear during break-in. Size10 oz.can